Last updated on 2026-03-30 08:53:28 CEST.
| Package | ERROR | NOTE | OK |
|---|---|---|---|
| betaselectr | 14 | ||
| lavaan.printer | 14 | ||
| lmhelprs | 1 | 13 | |
| manymome | 1 | 13 | |
| manymome.table | 14 | ||
| modelbpp | 14 | ||
| power4mome | 1 | 13 | |
| semfindr | 1 | 13 | |
| semhelpinghands | 14 | ||
| semlbci | 14 | ||
| semlrtp | 14 | ||
| semptools | 1 | 13 | |
| stdmod | 14 |
Current CRAN status: OK: 14
Current CRAN status: OK: 14
Current CRAN status: NOTE: 1, OK: 13
Version: 0.4.4
Check: package dependencies
Result: NOTE
Package suggested but not available for checking: 'semPlot'
Flavor: r-oldrel-windows-x86_64
Current CRAN status: NOTE: 1, OK: 13
Version: 0.3.4
Check: package dependencies
Result: NOTE
Packages suggested but not available for checking: 'semPlot', 'semptools'
Flavor: r-oldrel-windows-x86_64
Current CRAN status: OK: 14
Current CRAN status: OK: 14
Current CRAN status: ERROR: 1, OK: 13
Version: 0.2.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [125s/63s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(power4mome)
>
> test_check("power4mome")
Starting 2 test processes.
> test-power4test_mg.R:
> test-power4test_mg.R: Updating the simulation for sample size: 150
> test-power4test_mg.R: Re-simulate the data:
> test-power4test_mg.R: Fit the model(s):
> test-power4test_mg.R: Update the test(s):
> test-power4test_mg.R: Update test_parameters: CIs (pars: m~x,m~x.g2) :
> test-power4test_mg.R:
> test-power4test_mg.R: Updating the simulation for sample size: 200
> test-power4test_mg.R: Re-simulate the data:
> test-power4test_mg.R: Fit the model(s):
> test-power4test_mg.R: Update the test(s):
> test-power4test_mg.R: Update test_parameters: CIs (pars: m~x,m~x.g2) :
Saving _problems/test-test_indirects-62.R
[ FAIL 1 | WARN 0 | SKIP 76 | PASS 501 ]
══ Skipped tests (76) ══════════════════════════════════════════════════════════
• A long test with parallel processing. Test interactively (4):
'test-power4test_update_parallel.R:1:1',
'test-q_functions_pba_long_parallel.R:1:1',
'test-q_functions_pba_long_serial.R:1:1',
'test-q_functions_pba_long_simple.R:1:1'
• A long test with parallel processing. Test interactively. (12):
'test-do_FUN_local_function.R:1:1',
'test-x_from_power_algorithm_bisection.R:1:1',
'test-x_from_power_algorithm_prob_bisection.R:1:1',
'test-x_from_power_algorithm_prob_bisection_indirect.R:1:1',
'test-x_from_power_algorithm_prob_bisection_reuse_trials.R:1:1',
'test-x_from_power_for_es.R:1:1',
'test-x_from_power_for_es_bisection_close_enough.R:1:1',
'test-x_from_power_for_es_ind.R:1:1', 'test-x_from_power_for_n.R:1:1',
'test-x_from_power_for_n_bisection.R:1:1',
'test-x_from_power_for_n_bisection_close_enough.R:1:1',
'test-x_from_power_for_n_prob_bisection_close_enough.R:1:1'
• Graphs: Test interactively (1): 'test-x_from_power_for_n_short_plot.R:1:1'
• Internal (5): 'test-pba_diag.R:1:1',
'test-x_from_power_algorithm_bisection_difficult_cases.R:1:1',
'test-x_from_power_algorithm_prob_bisection_check_sequence.R:1:1',
'test-x_from_power_for_es_check_extend.R:1:1',
'test-x_from_power_for_n_check_extend.R:1:1'
• Internal: Only valid under a specific configuration (1):
'test-x_from_power_for_n_escape_a_loop.R:1:1'
• Not used (2): 'test-x_from_power_algorithm_bisection_extend_interval.R:1:1',
'test-x_from_power_algorithm_bisection_short.R:1:1'
• On CRAN (51): 'test-add_cov.R:1:1', 'test-add_cov_indicators.R:1:1',
'test-do_test_catch_error.R:1:1', 'test-power4test_mg2.R:1:1',
'test-power_curve.R:1:1', 'test-q_functions_arbitrary.R:1:1',
'test-q_functions_parallel.R:1:1',
'test-q_functions_pba_short_parallel.R:1:1',
'test-q_functions_pba_short_serial.R:1:1',
'test-q_functions_pba_short_simple.R:1:1', 'test-q_functions_serial.R:1:1',
'test-q_functions_simple.R:1:1', 'test-q_functions_simple_bz.R:1:1',
'test-q_functions_simple_reject.R:1:1', 'test-sim_data_print_cond.R:1:1',
'test-sim_data_print_cond_only.R:1:1',
'test-test_extrapolate_cond_indirect.R:1:1',
'test-test_extrapolate_indirect.R:1:1',
'test-test_extrapolate_indirects.R:1:1', 'test-test_extrapolate_mome.R:1:1',
'test-test_extrapolate_part_cond_indirect.R:1:1',
'test-test_extrapolate_part_indirect.R:1:1',
'test-test_extrapolate_part_indirects.R:1:1',
'test-test_extrapolate_part_mome.R:1:1', 'test-test_iseed.R:1:1',
'test-test_power_by_es_catch_power4test_error.R:1:1',
'test-test_power_by_es_find_range.R:1:1',
'test-test_power_by_n_catch_power4test_error.R:1:1',
'test-x_from_power_algorithm_prob_bisection_short_es.R:1:1',
'test-x_from_power_algorithm_prob_bisection_short_n.R:1:1',
'test-x_from_power_for_es_error_catch.R:1:1',
'test-x_from_power_for_es_more_than_one_result.R:1:1',
'test-x_from_power_for_es_short.R:1:1',
'test-x_from_power_for_es_short_close.R:1:1',
'test-x_from_power_for_es_short_close_power_curve_point.R:1:1',
'test-x_from_power_for_es_short_close_power_curve_ublb.R:1:1',
'test-x_from_power_for_es_short_use_by.R:1:1',
'test-x_from_power_for_es_short_use_x_from.R:1:1',
'test-x_from_power_for_n_error_catch.R:1:1',
'test-x_from_power_for_n_merge_all_tests.R:1:1',
'test-x_from_power_for_n_more_than_one_rr.R:1:1',
'test-x_from_power_for_n_region_merge_all_tests.R:1:1',
'test-x_from_power_for_n_region_reject.R:1:1',
'test-x_from_power_for_n_short.R:1:1',
'test-x_from_power_for_n_short_close.R:1:1',
'test-x_from_power_for_n_short_close_power_curve_point.R:1:1',
'test-x_from_power_for_n_short_close_power_curve_ublb.R:1:1',
'test-x_from_power_for_n_short_n_region.R:1:1',
'test-x_from_power_for_n_short_reject.R:1:1',
'test-x_from_power_for_n_short_use_by_n.R:1:1',
'test-x_from_power_for_n_short_use_x_from.R:1:1'
══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test-test_indirects.R:61:1'): indirect effects ────────────────────
Expected `chk[[1]]$sig[1]` to equal `chkb[[1]]$sig[1]`.
Differences:
`actual`: 0.00
`expected`: 0.20
[ FAIL 1 | WARN 0 | SKIP 76 | PASS 501 ]
Error:
! Test failures.
Execution halted
Flavor: r-oldrel-macos-arm64
Current CRAN status: ERROR: 1, OK: 13
Version: 0.2.0
Check: tests
Result: ERROR
Running 'testthat.R' [81s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
> library(testthat)
> library(semfindr)
>
> test_check("semfindr")
Starting 2 test processes.
> test-est_change_approx_multi.R: This is lavaan 0.6-21
> test-est_change_approx_multi.R: lavaan is FREE software! Please report any bugs.
> test-approx_check.R: This is lavaan 0.6-21
> test-approx_check.R: lavaan is FREE software! Please report any bugs.
> test-est_change_loo_multi.R: The expected CPU time is 7.2 second(s).
> test-est_change_loo_multi.R: Could be faster if run in parallel.
> test-est_change_loo_multi_equal.R: The expected CPU time is 1.05 second(s).
> test-est_change_loo_multi_equal.R: Could be faster if run in parallel.
> test-est_change_loo_multi_select_by_op.R: The expected CPU time is 6.75 second(s).
> test-est_change_loo_multi_select_by_op.R: Could be faster if run in parallel.
> test-est_change_loo_multi.R:
> test-est_change_loo_multi.R: --
> test-est_change_loo_multi.R: Standardized Case Influence on Parameter Estimates --
> test-est_change_loo_multi.R:
> test-est_change_loo_multi.R: m1~iv1 a1 b m1~~m1 dv~~dv m1~1 dv~1 m1~iv1.g2 a2 b
> test-est_change_loo_multi.R: 18 0.000 0.000 0.131 0.000 -0.009 0.000 -0.007 -0.838 0.483 0.131
> test-est_change_loo_multi.R: 16 0.000 0.000 -0.364 0.000 0.005 0.000 0.018 0.208 -0.278 -0.364
> test-est_change_loo_multi.R: 13 0.000 0.000 -0.031 0.000 0.002 0.000 0.002 1.032 -0.139 -0.031
> test-est_change_loo_multi.R: 40 -0.025 -0.454 0.177 0.821 -0.053 0.551 0.178 0.000 0.000 0.177
> test-est_change_loo_multi.R: 25 0.316 -0.188 -0.246 -0.033 0.743 -0.075 -0.516 0.000 0.000 -0.246
> test-est_change_loo_multi.R: 27 0.620 0.822 0.082 0.238 -0.146 -0.244 -0.059 0.000 0.000 0.082
> test-est_change_loo_multi.R: 17 0.000 0.000 0.162 0.000 -0.011 0.000 -0.008 -0.432 -0.294 0.162
> test-est_change_loo_multi.R: 5 0.192 0.175 0.124 0.675 -0.132 -0.433 -0.098 0.000 0.000 0.124
> test-est_change_loo_multi.R: 34 -0.607 -0.513 -0.144 0.237 0.033 0.189 -0.231 0.000 0.000 -0.144
> test-est_change_loo_multi.R: 26 -0.060 -0.150 0.185 -0.125 0.646 -0.100 0.497 0.000 0.000 0.185
> test-est_change_loo_multi.R: m1~~m1.g2 dv~~dv.g2 m1~1.g2 dv~1.g2 gcd
> test-est_change_loo_multi.R: 18 0.871 -0.090 -0.652 -0.113 1.867
> test-est_change_loo_multi.R: 16 0.163 1.011 0.366 -0.695 1.764
> test-est_change_loo_multi.R: 13 0.286 -0.158 0.442 -0.027 1.279
> test-est_change_loo_multi.R: 40 0.000 0.008 0.000 0.040 1.242
> test-est_change_loo_multi.R: 25 0.000 -0.015 0.000 -0.051 1.054
> test-est_change_loo_multi.R: 27 0.000 0.004 0.000 0.019 1.030
> test-est_change_loo_multi.R: 17 0.251 0.428 0.455 0.462 0.915
> test-est_change_loo_multi.R: 5 0.000 0.006 0.000 0.029 0.818
> test-est_change_loo_multi.R: 34 0.000 -0.009 0.000 -0.032 0.769
> test-est_change_loo_multi.R: 26 0.000 0.008 0.000 0.039 0.752
> test-est_change_loo_multi.R:
> test-est_change_loo_multi.R: Note:
> test-est_change_loo_multi.R: - Changes are standardized raw changes if a case is included.
> test-est_change_loo_multi.R: - Only the first 10 case(s) is/are displayed. Set 'first' to NULL to display all cases.
> test-est_change_loo_multi.R: - Cases sorted by generalized Cook's distance.
> test-est_change_loo_multi.R:
> test-est_change_loo_multi.R: --
> test-est_change_loo_multi.R: Standardized Case Influence on Parameter Estimates --
> test-est_change_loo_multi.R:
> test-est_change_loo_multi.R: m1~iv1 a1 b m1~~m1 dv~~dv m1~1 dv~1 m1~iv1.g2 a2 b
> test-est_change_loo_multi.R: 18 0.000 0.000 0.131 0.000 -0.009 0.000 -0.007 -0.838 0.483 0.131
> test-est_change_loo_multi.R: 16 0.000 0.000 -0.364 0.000 0.005 0.000 0.018 0.208 -0.278 -0.364
> test-est_change_loo_multi.R: 13 0.000 0.000 -0.031 0.000 0.002 0.000 0.002 1.032 -0.139 -0.031
> test-est_change_loo_multi.R: 40 -0.025 -0.454 0.177 0.821 -0.053 0.551 0.178 0.000 0.000 0.177
> test-est_change_loo_multi.R: 25 0.316 -0.188 -0.246 -0.033 0.743 -0.075 -0.516 0.000 0.000 -0.246
> test-est_change_loo_multi.R: 27 0.620 0.822 0.082 0.238 -0.146 -0.244 -0.059 0.000 0.000 0.082
> test-est_change_loo_multi.R: 17 0.000 0.000 0.162 0.000 -0.011 0.000 -0.008 -0.432 -0.294 0.162
> test-est_change_loo_multi.R: 5 0.192 0.175 0.124 0.675 -0.132 -0.433 -0.098 0.000 0.000 0.124
> test-est_change_loo_multi.R: 34 -0.607 -0.513 -0.144 0.237 0.033 0.189 -0.231 0.000 0.000 -0.144
> test-est_change_loo_multi.R: 26 -0.060 -0.150 0.185 -0.125 0.646 -0.100 0.497 0.000 0.000 0.185
> test-est_change_loo_multi.R: m1~~m1.g2 dv~~dv.g2 m1~1.g2 dv~1.g2 gcd
> test-est_change_loo_multi.R: 18 0.871 -0.090 -0.652 -0.113 1.867
> test-est_change_loo_multi.R: 16 0.163 1.011 0.366 -0.695 1.764
> test-est_change_loo_multi.R: 13 0.286 -0.158 0.442 -0.027 1.279
> test-est_change_loo_multi.R: 40 0.000 0.008 0.000 0.040 1.242
> test-est_change_loo_multi.R: 25 0.000 -0.015 0.000 -0.051 1.054
> test-est_change_loo_multi.R: 27 0.000 0.004 0.000 0.019 1.030
> test-est_change_loo_multi.R: 17 0.251 0.428 0.455 0.462 0.915
> test-est_change_loo_multi.R: 5 0.000 0.006 0.000 0.029 0.818
> test-est_change_loo_multi.R: 34 0.000 -0.009 0.000 -0.032 0.769
> test-est_change_loo_multi.R: 26 0.000 0.008 0.000 0.039 0.752
> test-est_change_loo_multi.R:
> test-est_change_loo_multi.R: Note:
> test-est_change_loo_multi.R: - Changes are standardized raw changes if a case is included.
> test-est_change_loo_multi.R: - Only the first 10 case(s) is/are displayed. Set 'first' to NULL to display all cases.
> test-est_change_loo_multi.R: - Cases sorted by generalized Cook's distance.
> test-est_change_loo_single.R: The expected CPU time is 1.5 second(s).
> test-est_change_loo_single.R: Could be faster if run in parallel.
> test-est_change_loo_single_equal.R: The expected CPU time is 0.3 second(s).
> test-est_change_loo_single_equal.R: Could be faster if run in parallel.
> test-est_change_plot.R: The expected CPU time is 0.9 second(s).
> test-est_change_plot.R: Could be faster if run in parallel.
> test-est_change_loo_single_select_by_op.R: The expected CPU time is 9.75 second(s).
> test-est_change_loo_single_select_by_op.R: Could be faster if run in parallel.
> test-est_change_raw_approx_multi.R: The expected CPU time is 0.63 second(s).
> test-est_change_raw_approx_multi.R: Could be faster if run in parallel.
> test-est_change_raw_approx_multi_labelled.R: The expected CPU time is 0.54 second(s).
> test-est_change_raw_approx_multi_labelled.R: Could be faster if run in parallel.
> test-est_change_loo_single_select_by_op.R: Note: Some cases led to warnings if excluded. Please check the element 'post_check' for cases with values other than `TRUE`.
> test-est_change_loo_single_select_by_op.R: Note: Some cases led to nonconvergence if excluded. Please check the element 'converged' for cases with values other than `TRUE`.
> test-est_change_raw_approx_single.R: The expected CPU time is 2.63 second(s).
> test-est_change_raw_approx_single.R: Could be faster if run in parallel.
> test-est_change_raw_approx_single_labelled.R: The expected CPU time is 1.88 second(s).
> test-est_change_raw_approx_single_labelled.R: Could be faster if run in parallel.
> test-est_change_raw_loo_multi.R: The expected CPU time is 2.02 second(s).
> test-est_change_raw_loo_multi.R: Could be faster if run in parallel.
> test-est_change_raw_loo_multi_select_by_op.R: The expected CPU time is 3.6 second(s).
> test-est_change_raw_loo_multi_select_by_op.R: Could be faster if run in parallel.
> test-est_change_raw_loo_multi_std.R: The expected CPU time is 3.83 second(s).
> test-est_change_raw_loo_multi_std.R: Could be faster if run in parallel.
> test-est_change_raw_loo_multi_std.R: Note: Some cases led to warnings if excluded. Please check the element 'post_check' for cases with values other than `TRUE`.
> test-est_change_raw_loo_multi_std.R: Note: Some cases led to nonconvergence if excluded. Please check the element 'converged' for cases with values other than `TRUE`.
> test-est_change_raw_loo_single.R: The expected CPU time is 2.63 second(s).
> test-est_change_raw_loo_single.R: Could be faster if run in parallel.
> test-est_change_raw_loo_single_select_by_op.R: The expected CPU time is 6.75 second(s).
> test-est_change_raw_loo_single_select_by_op.R: Could be faster if run in parallel.
> test-est_change_raw_loo_single_std.R: The expected CPU time is 8.25 second(s).
> test-est_change_raw_loo_single_std.R: Could be faster if run in parallel.
> test-est_change_raw_loo_single_select_by_op.R: Note: Some cases led to warnings if excluded. Please check the element 'post_check' for cases with values other than `TRUE`.
> test-est_change_raw_loo_single_select_by_op.R: Note: Some cases led to nonconvergence if excluded. Please check the element 'converged' for cases with values other than `TRUE`.
> test-est_change_raw_loo_single_std.R: Note: Some cases led to warnings if excluded. Please check the element 'post_check' for cases with values other than `TRUE`.
> test-est_change_raw_loo_single_std.R: Note: Some cases led to nonconvergence if excluded. Please check the element 'converged' for cases with values other than `TRUE`.
> test-est_change_raw_loo_single_user_function.R: The expected CPU time is 3 second(s).
> test-est_change_raw_loo_single_user_function.R: Could be faster if run in parallel.
> test-fit_measurse_change_multi.R: The expected CPU time is 3.6 second(s).
> test-fit_measurse_change_multi.R: Could be faster if run in parallel.
> test-fit_measurse_change_multi_select_by_id.R: The expected CPU time is 0.97 second(s).
> test-fit_measurse_change_multi_select_by_id.R: Could be faster if run in parallel.
> test-fit_measurse_change_single.R: The expected CPU time is 5.25 second(s).
> test-fit_measurse_change_single.R: Could be faster if run in parallel.
> test-fit_measurse_change_single_select_by_id.R: The expected CPU time is 0.45 second(s).
> test-fit_measurse_change_single_select_by_id.R: Could be faster if run in parallel.
> test-index_plot.R: The expected CPU time is 0.9 second(s).
> test-index_plot.R: Could be faster if run in parallel.
> test-influence_stat_multi.R: The expected CPU time is 1.65 second(s).
> test-influence_stat_multi.R: Could be faster if run in parallel.
> test-influence_stat_multi_select_by_id.R: The expected CPU time is 0.75 second(s).
> test-influence_stat_multi_select_by_id.R: Could be faster if run in parallel.
> test-influence_stat_single.R:
Error:
! testthat subprocess exited in file 'test-influence_stat_single.R'.
Caused by error:
! R session crashed with exit code -1073741819
Backtrace:
▆
1. └─testthat::test_check("semfindr")
2. └─testthat::test_dir(...)
3. └─testthat:::test_files(...)
4. └─testthat:::test_files_parallel(...)
5. ├─withr::with_dir(...)
6. │ └─base::force(code)
7. ├─testthat::with_reporter(...)
8. │ └─base::tryCatch(...)
9. │ └─base (local) tryCatchList(expr, classes, parentenv, handlers)
10. │ └─base (local) tryCatchOne(expr, names, parentenv, handlers[[1L]])
11. │ └─base (local) doTryCatch(return(expr), name, parentenv, handler)
12. └─testthat:::parallel_event_loop_chunky(queue, reporters, ".")
13. └─queue$poll(Inf)
14. └─base::lapply(...)
15. └─testthat (local) FUN(X[[i]], ...)
16. └─private$handle_error(msg, i)
17. └─cli::cli_abort(...)
18. └─rlang::abort(...)
Execution halted
Flavor: r-devel-windows-x86_64
Current CRAN status: OK: 14
Current CRAN status: OK: 14
Current CRAN status: OK: 14
Current CRAN status: ERROR: 1, OK: 13
Version: 0.3.3
Check: package dependencies
Result: ERROR
Package required but not available: 'semPlot'
See section 'The DESCRIPTION file' in the 'Writing R Extensions'
manual.
Flavor: r-oldrel-windows-x86_64
Current CRAN status: OK: 14